Table of Contents
Advertisement
MECHA C2 User's Guide
For firmware version 12275 or newer.
NOTE. Images shown in this guide may not be an exact
representation of the current firmware version.
Download the latest version of this guide from
https://www.nodalninja.com/Manuals/c2-guide.pdf
Web: www.nodalninja.com,
Support email address: mecha@nodalninja.com
Copyright © 2021 by Fanotec International Limited
All rights reserved. No part of this guide may be reproduced or transmitted
in any form by any means, electronic, mechanical, photocopying, recording,
or otherwise, without the prior written permission of the publisher. For
information on getting permission for reprints and excerpts, contact
nick@fanotec.com
How to use this User's Guide
Welcome to the MECHA C2 User's Guide!
C2 is our second generation of controllers, with OLED display, external
battery, and support for two MECHA rotators.
Before you start reading page-by-page, go section-by-section, looking at
titles, tables, highlighted paragraphs, images, etc. Although there is a lot of
information you have not read yet, this will clue you into what you are
about to read.
After that, go back to the beginning and read the Introduction and Before
First Use chapters. Please move on only after you become familiar with the
basic operations we present here, and leave aside the more complex
chapters and deepen the part that interests you more.
Even if you are an experienced user, please pay attention to the warnings.
If you find the firmware update and other operations difficult, you can
receive support and guidance at mecha@nodalninja.com
Let's get started!
MECHA C2 User's Guide v.02.5
www.fanotec.com
© 2021 FANOTEC
6
Advertisement
Table of Contents
