Table of Contents
Advertisement
So now you can set button intervals freely, as there is
\S
for 90º rotations.
Backlash compensation options
● BACKLASH 1 COMPENSATION — Compensation of backlash for the lower
rotator.
● BACKLASH 2 COMPENSATION — Compensation of backlash for the upper
rotator.
The purpose of backlash compensation is to improve the precision of left-
right and up-down movements, and it can be performed after a long
period of use.
S
Press the
button to start the backlash compensation procedure and
wait until the power button symbol start flashing on the display, then press
P
the
button when you notice that MECHA starts moving very slightly to
the left.
● i3 REAL MOVE 1 / 2 — This is the length of a path traveled by a REAL
device controlled by the Rotator 1/2 for a certain amount of rotation
performed by MECHA. See the
S
+
either
or
● ZENITH / NADIR POS. — Press either
mode if you need to change the default values, which are 90° and -90°.
Other values may be useful for backlash reasons or to have a certain
overlap. MECHA will use these values in scripts that contain Z and N.
● UPDATE — Press the
MECHA will use the latest data connection available to connect to the
internet.
● REBOOT — Press the
it.
● FIRMWARE VERSION — Press the
firmware version.
● UPDATE USING H-SPOT — Press the
using a hot-spot with the name MECHA-UPDATE and (default)
password 87654321, which needs to be created and active before using
this option (see
MECHA C2 User's Guide v.02.5
REAL MOVE
button to enter edit mode and adjust its value.
S
button to re-update the current firmware.
S
button to reboot MECHA without power cycling
S
Firmware Update Using a
© 2021 FANOTEC
option for more details. Press
S
+
or
button to enter edit
button to show the current
S
button to update the firmware
Hot-spot).
/S
and and
41
Advertisement
Table of Contents
