Table of Contents
Advertisement
When you press the
on the display, you can also perform simple rotations.
P
Use the
button to exit.
If the above simple rotations do not work as expected, the
!
rotators in use may not be set correctly (see Set the Rotator
Using C2's Menu), or the intervals 1[-], 2[+] and 3[=] are not the
default ones in the Config Menu or on the Configuration page.
Parked, Level and Raised Positions
The
Simple Rotations
needs to be in a certain position. The basic positions required for presets are
shown in the image below, and they are:
Parked
The naming conventions
for starting and ending positions
for dual axis presets available via
More from Server...
MECHA C2 User's Guide v.02.5
P
button and the battery percentage is shown
mentioned above are very helpful when the upper rail
Level
© 2021 FANOTEC
Raised
Adjust
the position
/\
using
buttons
to match
the preset
before starting
the preset.
18
Advertisement
Table of Contents
