Table of Contents
Advertisement
→ There is no C1 equivalent of the above button.
P
○
On both C1 and C2, the power button is used to power on/off
MECHA, to confirm or cancel some operations, and it is also the
equivalent of the number 0 (zero) when power codes are entered.
Power codes are codes that start with zero.
● Both C1 and C2 have support for IR or wired remote control.
● Both C1 and C2 can be controlled using the User Interface and also using
their own buttons.
●
C2 uses Wi-Fi for connection, as does C1, so both can be accessed
directly by phone or via a Wi-Fi network, or even via the Internet, with a
device connected to the Internet.
● On both C1 and C2, for complex tasks, or to assign complex tasks to a
single button, the User Interface can be used.
MECHA C2 User's Guide v.02.5
© 2021 FANOTEC
121
Advertisement
Table of Contents
