Table of Contents
Advertisement
What happens if the direction of rotation is not specified?
If the direction of rotation is not specified when a preset is created, then
when launching the preset from the Preset (P) Menu it will ask for direction
(ROT. SENSE) and other info, as shown in the images below.
● First, optional, use the
level the upper rail, if necessary, as shown in
S
press the
button to confirm. Use the
position of the upper rail is correct (level in our example) and no other
adjustments are needed.
<
● Use the
or
● When launched by mistake, use the
MECHA C2 User's Guide v.02.5
<>/\
>
button to execute the preset to the left or right.
© 2021 FANOTEC
buttons to set the initial view and
Simple
S
button to skip this step if the
P
button to cancel.
Rotations, then
27
Advertisement
Table of Contents
