Fanotec MECHA C2 User Manual page 104

2< 2>
or
Executes the Preset 2 to the left or to the right.
By default, the Preset 2 consists of 6 shots around, or it is the preset
saved with the [Save2] UI button.
3< 3>
or
Executes the Preset 3 to the left or to the right.
By default, the Preset 3 consists of 8 shots around, or it is the preset
saved with the [Save3] UI button.
131< 131>
or
Executes a panorama of 6 shots around to the left or to the right.
132< 132>
or
Executes a panorama of 12 shots around to the left or to the right.
1312< 1312>
or
Executes a panorama of 12 shots around, 3 rows ‒ at 0° and at +/-45° ‒
plus zenith and nadir, to the left or to the right. The lower rotator must
be parked, i.e. oriented upward, as for the zenith photo.
1313< 1313>
or
The same as 1312, but with the upper rotator in the level position. First
time, please test the codes without camera mounted on the panohead.
1321< 1321>
or
The same as 1312, but with the upper rotator in the raised position. First
time, please test the codes without camera mounted on the panohead.
121< → MECHA ID
Shows the MECHA's ID, like "123ABC".
123< → MAC ADDRESS
Shows the entire MAC address, like "123ABC123ABC".
323< → IP ADDRESS
Shows the full IP address, like "192.168.0.100".
MECHA C2 User's Guide v.02.5
© 2021 FANOTEC
104