Fanotec MECHA C2 User Manual page 118

9=45, — Then, at the 9th shot from the previous change, the tilt becomes
45°, and
-10=90, — then, at the 10th shot from the previous change, the tilt becomes
90 for zenith, and
=_90, — the next shot is at the same tilt, but 90° apart (the second zenith
shot).
=-90_0, — Then, at the next shot, the tilt becomes 90° for nadir, and
=_-90, — the next shot is at the same tilt, but 90° apart (the second nadir
shot).
= — End.
To end in the parked position, as it started, in order to repeat it again and
again:
S=90, 1=0_0, =_30, 11=-45, =_36, 9=45, 10=90,
=_90, =-90_0, =_-90, =90
When the camera is facing up, and its buttons and
display are not accessible, you can add P to the first
shot:
1=P0_0,
MECHA will pause before the first shot, and will
continue only after you click the [PAUSE] button on
>
UI or press the
MECHA C2 User's Guide v.02.5
button on controller.
© 2021 FANOTEC
118