Deleting A Storage Device; Adding A Remote Ingest Source; Editing Remote Ingest Source Settings - Christie CP4315-RGB User Manual

2. Select a storage device in the left pane.
3. To make the new storage device the primary storage drive, select the Set as Primary Drive
slider.
The color of the slider changes to green to indicate it is active.
4. Select Save.

Deleting a storage device

Delete a storage device when it is no longer required.
1. In the left navigation menu, select Service Setup > Storage Device Setup.
2. In the left pane, select a storage device.
3. Select Delete.
4. To confirm the deletion, select Delete.

Adding a remote ingest source

Add a remote ingest source to uploaded content from a remote storage device.
1. In the left navigation menu, select Service Setup > Remote Ingest Setup.
2. Select + New Ingest Source.
3. In the Name field, type a name for the ingest source.
4. In the IP Address field, type an IP address for the ingest source.
5. In the Port field, type the port number for the ingest source.
By default, the port value is 21.
6. Select Add.
7. In the Username field, type the user name if required for the ingest source.
8. In the Password field, type the password if required for the ingest source.
9. Select the Type list and select the device type.
10. To test the connection to the ingest source, select Test Connection.
11. To save the configuration, select Save.

Editing remote ingest source settings

Edit the settings of remote ingest sources when device or communication settings change.
1. In the left navigation menu, select Service Setup > Remote Ingest Setup.
2. In the left pane, select a remote ingest source.
3. Edit the settings displayed in the right pane.
4. Select Save.
Cinema 4K-RGB User Guide–CP4315-RGB, CP4320-RGB, CP4325-RGB, CP4330-RGB
020-102712-06 Rev. 1 (03-2021)
Copyright © 2021 Christie Digital Systems USA, Inc. All rights reserved.
Managing storage devices
74