Logging Out Of The Projector; Turning The Touch Panel On Or Off; Calibrating The Touch Panel Display; Turning The Light Source On Or Off - Christie CP4315-RGB User Manual

2. In the User list, select a user name.
3. Enter your password.
4. Select Login.

Logging out of the projector

Log out of the projector to restrict access to projector menus or to change access permissions.
• Select Logout.

Turning the touch panel on or off

Turn the touch panel on to view projector menus, or turn the touch panel off to conserve energy.
• To turn the touch panel on or off, press the power button

Calibrating the touch panel display

Calibrate the touch panel to improve its appearance and responsiveness to touch commands.
1. Log on to the projector.
2. In the left navigation menu, select Service Setup > Preferences.
3. Select Touch Panel.
4. To calibrate the touch panel, select Start Calibration.
5. Select and hold the center of each point as they appear.
The screen is dismissed after all points are calibrated.

Turning the light source on or off

Turn the light source on to display content or view test patterns, turn the light off to extend the life of
the lasers.
• To turn the light source on or off, in the right toolbar, select and hold Light.
If you turn on the light source when the projector power is off, power is turned on
automatically.
Cinema 4K-RGB User Guide–CP4315-RGB, CP4320-RGB, CP4325-RGB, CP4330-RGB
020-102712-06 Rev. 1 (03-2021)
Copyright © 2021 Christie Digital Systems USA, Inc. All rights reserved.
Operating the projector
(A) on the top of the touch panel.
22