Network Settings; Connecting The Projector To The Theater Network; Activating Snmp - Christie CineLife+ CP4415-RGB User Manual

Network settings

Learn how to connect the projector to media devices and wired networks.
The system provides the MAC address of the projector automatically.

Connecting the projector to the theater network

Connect the projector to the theater network to control it remotely and allow it to communicate with
other network devices.
1. Connect the Ethernet cable from the theater network to the Management port on the input
panel.
2. In the left navigation menu, select Service Setup > Network Settings.
3. In the Port list, select Management.
4. Enter the network settings:
• To obtain the network settings automatically, select Automatic.
• To enter the settings manually, select Manual and complete these fields:
Field
IP Address
Subnet Mask
Gateway
Primary DNS
Secondary DNS
5. Select Save.

Activating SNMP

Activate the Simple Network Management Protocol (SNMP) to monitor the theater network for
conditions that indicate communication or hardware failures.
On CineLife+ projectors, SNMP is enabled by default.
1. In the left navigation menu, select Service Setup > Network Settings.
2. Select the SNMP tab.
3. Select the SNMP slider.
The color of the slider changes to green to indicate it is active.
4. In the SNMP Settings area, select the SNMP version.
CineLife+ User Guide–CP4415-RGB, CP4420-RGB, CP4435-RGB, CP4440-RGB, CP4450-RGB, CP2420-Xe, CP4420-Xe
020-103073-06 Rev. 1 (03-2022)
Copyright © 2022 Christie Digital Systems USA, Inc. All rights reserved.
Description
IP address of the projector
Subnet mask to which the IP address belongs
IP address for the network gateway
IP address of the primary DNS server
IP address of the secondary DNS server
59