Modifying Automation Device Settings; Removing An Automation Device From Your Auditorium - Christie CP4315-RGB User Manual
Cinema 4k-rgb
Hide thumbs
Also See for CP4315-RGB:
- Service manual (97 pages) ,
- Installation and setup manual (52 pages) ,
- Replacing (7 pages)
Table of Contents
Advertisement
4. In the Device Type list, select the device type.
5. In the Select Device list, select the device.
6. Select Add.
7. Complete these fields:
•
IP Address—The IP address of the automation device.
•
Port—The port used by the automation device to communicate with the projector.
•
Username—The username used to access the automation device.
•
Password—The password used to access the automation device.
•
Keep Alive Message—The message value that is sent to the automation device to ensure
the projector is not disconnected when inactive.
•
Keep Alive Interval (ms)—The time interval (in milliseconds) for sending the Keep Alive
Message to the automation device.
8. Select Save.
The added device is displayed in the list of auditorium devices in the Macro Editor.
Modifying automation device settings
Modify the settings of automation devices when parameters such as the user name or password
change. If the settings are not updated, the automation device might be unable to communicate with
other theater hardware or be controlled remotely.
1. In the left navigation menu, select Automation > My Auditorium Devices.
2. In the left pane, select an automation device.
3. Modify these fields:
•
IP Address—The IP address of the automation device.
•
Port—The port used by the automation device to communicate with the projector.
•
Username—The username used to access the automation device.
•
Password—The password used to access the automation device.
•
Keep Alive Message—The message value that is sent to the automation device to ensure
the projector is not disconnected when inactive.
•
Keep Alive Interval (ms)—The time interval (in milliseconds) for sending the Keep Alive
Message to the automation device.
4. Select Save.
Removing an automation device from your
auditorium
Remove an automation device when it is no longer required, or it has been physically removed from
the theater.
1. In the left navigation menu, select Automation > My Auditorium Devices.
2. In the left pane, select an automation device.
Cinema 4K-RGB User Guide–CP4315-RGB, CP4320-RGB, CP4325-RGB, CP4330-RGB
020-102712-06 Rev. 1 (03-2021)
Copyright
©
2021 Christie Digital Systems USA, Inc. All rights reserved.
Automation
87
Advertisement
Table of Contents
