SKA-3D actions
These are the available built-in commands for SKA-3D devices:
Command
Set Audio Input Channel
Mute On/Mute Off
Set Master Volume
Set Video Input Channel
Active Trigger Input
Creating a macro
Create a macro to make the projector perform a specific list of actions.
1. In the left navigation menu, select Automation > Macro Editor.
2. In the right pane, select Create New Macro.
3. Type a name for the macro.
The Name field cannot contain spaces.
4. Select the macro type.
5. Select Create.
6. Add an action item to the macro:
a) In the left pane, expand the My Auditorium list.
b) Under Automation, Playback, or Projector, select the action item.
7. To save the macro, select Save.
8. To test the macro, select Test.
Running a macro
Run a macro to have the projector perform a specific list of actions.
1. In the right toolbar of the touch panel, select Run Macro.
2. Select a macro.
Cinema 4K-RGB User Guide–CP4315-RGB, CP4320-RGB, CP4325-RGB, CP4330-RGB
020-102712-06 Rev. 1 (03-2021)
Copyright
©
2021 Christie Digital Systems USA, Inc. All rights reserved.
Description
Sets the audio input channel
Enables or disables muting
Sets the overall volume for the system
Sets the video input channel
Controls eight SKA-3D presets
To use this command, a trigger input must be associated with each of the SKA-3D
presets
Automation
85