Change The Air De-Oiling Element - multivac C200 Instruction Manual

Info
Only use low odour synthetic oil if food is being packed.
Check oil level on the oil sight glass:
– The oil level is then approximately in the middle of the oil sight
Turn the screw plug in the fill opening and screw it tight. To do so,
turn the screw plug clockwise.
Wipe off and remove any oil.
Fasten the safety guard.
Connect the machine to the mains electricity.
Switch on the machine.
Check the oil level after a couple of machine cycles.
7.6
Switch off the machine.
Disconnect the machine from the mains electricity.
Burn hazard!
The surface of the vacuum pump can reach temperatures of over
70 °C during operation.
WARNING
Touching the vacuum pump can lead to burns.
Before performing any work on the vacuum pump:
Allow the vacuum pump to cool down.
Wear personal protective equipment.
Allow the vacuum pump to cool down.
glass.
max.
min.

Change the air de-oiling element

03.06.2014
Change the oil in the vacuum pump
Maintenance
67