Modifying And Resetting Machine Cycles; Display Production Data; 4.13.1 Display Total Cycles Of The Machine; 4.13.2 Display Hours Of Operation - multivac C200 Instruction Manual

Display machine's
hours of operation
Display vacuum pump's
hours of operation
Set Ventilate diaphragm.
4.12

Modifying and resetting machine cycles

Call up the "operating data" menu.
Call up "Counter" menu.
Call up machine cycles.
Set the value with the <arrow> keys or set to "0".
– The set value is adopted.
4.13

Display production data

4.13.1 Display total cycles of the machine

Call up the "operating data" menu.
Call up "Counter" menu.
Select Total cycles.

4.13.2 Display hours of operation

Call up the "Operating data" menu.
Call up "Hours of operation" menu.
Select Hours of operation.
Call up the "Operating data" menu.
Call up "Hours of operation" menu.
Select Vacuum pump.

4.13.3 Display cycle time

Call up the "operating data" menu.
Select the "Cycle time" menu.
– A list of cycle times is displayed.
03.06.2014
Operation
Entering basic settings
45