Packing Products - multivac C200 Instruction Manual

4.3
Open the chamber lid.
If necessary, use filling plates.
– The pouch neck should be located at the centre of the pouch
Use the sloping insert for packaging liquids, see Section 5.1 "I
SERT AND REMOVE THE SLOPING INSERT
– Liquid cannot escape from the film pouch.
Switch on the machine.
Load the desired recipe.
Health hazard!
Insufficient or sporadic cleaning can promote the growth of micro-
organisms which can contaminate the product.
WARNING
This can pose serious health hazards for consumers.
Disinfect your hands should they come into contact with any
machine part other than the operating elements.
Do NOT lay the product on the machine.
Observe the company cleaning guidelines.
Follow instructions in the chapter 'Cleaning'.
Fill the film pouch.
Insert film pouch.
– The opening of the film pouch should extend 2 to 3 cm beyond

Packing products

height x.
For the first test packs, use a preset recipe, see Section 2.7
"P " and see Section 4.8.2 "L
RESET RECIPES
".
TINGS
the sealing device.
03.06.2014
Operation
Packing products
".
OAD FACTORY SET-
N-
37