Diagnostic Display; Access Rights - multivac C200 Instruction Manual

Description
Display
26
Fig. 15: Function display on/off (013)
1 Selected function
2 Switch status
3 Symbol of function (e.g. sealing)
2.3.4

Diagnostic display

Fig. 16: Diagnostic display
1
Diagnostic number
2 Type of error acknowledgement
3 Error text (in ticker)
Eliminate the malfunction, see Section 8 "T
2.3.5

Access rights

To avoid incorrect operation, the following access rights are assigned.
Access right
Operator
Set-up personnel
Service
Super-PIN
03.06.2014
Explanation
Not password protected.
The operator may enter settings that are re-
quired to operate the machine (e.g. Lan-
guage choice).
The operator cannot modify values.
Password protected.
The set-up personnel can modify values and
switch statuses.
Only a limited number of settings in the ser-
vice menu are possible (e.g. vacuum test).
Unrestricted authorisation.
• Reset password for access right Set-up
personnel to factory setting.
• Reset machine control.
".
ROUBLESHOOTING