Cleaning; Notes On Cleaning; Instructions For Creating Company Cleaning Guidelines - multivac C200 Instruction Manual

Cleaning

48
6 Cleaning
The objective of the cleaning work is to avoid risks to hygiene. If the
cleaning is insufficient or not performed properly, this may result in
the contamination of the products and to health hazards for end con-
sumers. In addition, the machine may be damaged.
Info
Optional equipment for aiding the cleaning can be retrofitted for
various machine types. For further information, contact our sales
and service departments.
6.1

Notes on cleaning

6.1.1 Instructions for creating company cleaning guide-
lines
The company operating the machine is under an obligation to create
company cleaning guidelines. These cleaning instructions must be
matched to the particular needs of the operating company (type of
product, environment, sector etc).
The following points should be contained in the company cleaning
guidelines:
• Required cleaning intervals.
• Care products to be used. For care products, refer to the "Care
products table".
• Using the proper dosage of care products.
• Persons in charge of cleaning.
• The individual working stages for hygienic cleaning of the machine,
taking into consideration the following points:
– Safety instructions.
– Instructions for maintaining the machine's value.
– Instructions on the handling of cleansers.
– Instructions on the handling of disinfectants.
– Instructions on the handling of anti-corrosion agents and lubri-
cants.
– Instructions on the handling of cleaning devices.
– Recommendations for the course of the daily cleaning.
– Recommendations for the course of the intensive cleaning.
– Qualifications of the cleaning personnel. Assign only suitably
qualified and instructed personnel. Information on qualification
and training can be obtained from MULTIVAC Service.
• First aid measures.
03.06.2014