Entire Machine - Alkaline Cleaning And Disinfection; Vacuum Pump - Checking Oil Level, Topping Up; Entire Machine - Acidic Cleaning And Disinfection; Connections - Visual Inspection - multivac C200 Instruction Manual

Maintenance
Maintenance recommendation
60
If necessary, replace the sealing bar, see Section 7.3 "R
PLACE THE SEALING BAR
Check the counter-pressure bar for damage.
If necessary, repair the counter-pressure bar, see Section 7.4
"R
EPAIR COUNTER
7.2.4

Entire machine - Alkaline cleaning and disinfection

See company cleaning guidelines and see Section 6 "C
7.2.5

Vacuum pump - Checking oil level, topping up

Check the oil level on the oil sight glass.
If water is present in the oil, change the oil in the vacuum
pump, see Section 7.5 "C
If necessary, refill oil, see Section 7.5.2 "F
.".
PUMP WITH OIL
7.2.6

Entire machine - Acidic cleaning and disinfection

See company cleaning guidelines and see Section 6 "C
7.2.7

Connections - Visual inspection

Disconnect the machine from the mains electricity.
Check power cable for damage.
If present, check that the supply line for inert gas is fitted tightly
and undamaged.
7.2.8

Vacuum system - Check

Perform a vacuum test, see Section 7.8 "P
".
UUM TEST
7.2.9

Vacuum pump - Oil change

Change the oil in the vacuum pump, see Section 7.5 "C
OIL IN THE VACUUM PUMP
03.06.2014
".
- ".
PRESSURE BAR
HANGE THE OIL IN THE VACUUM PUMP
".
E-
LEANING
".
ILLING THE VACUUM
LEANING
ERFORMING THE VAC-
HANGE THE
".
".