Vacuum Pump - Exchanging The Air De-Oiling Element; 7.2.11 Entire Machine - Check The Age; Replace The Sealing Bar; Remove The Sealing Bar - multivac C200 Instruction Manual

7.2.10 Vacuum pump - Exchanging the air de-oiling ele-
ment
Change the air de-oiling element, see Section 7.6 "C
-
AIR DE OILING ELEMENT

7.2.11 Entire machine - Check the age

Read the year of manufacture on the type plate.
If the machine is older than 19 years:
Shut down the machine.
Have the safety functions checked by MULTIVAC Service.
7.3

Replace the sealing bar

7.3.1

Remove the sealing bar

Switch off the machine.
Disconnect the machine from the mains electricity.
Open the chamber lid.
Let the sealing bar cool down.
Pull out the sealing bar.
7.3.2

Install the sealing bar

Disconnect the machine from the mains electricity.
Install the sealing bar on the carriers.
03.06.2014
Maintenance recommendation
".
Maintenance
HANGE THE
61