multivac C200 Instruction Manual page 54

Cleaning
Cleaning recommendations
54
Only clean the chamber lid manually with a soft cloth or a soft
brush.
Wait until the application time has elapsed (see instructions of
cleanser manufacturer).
Wipe with new cloth and water of drinking quality.
Inspect the entire machine and the floor for dirt and cleanser resi-
dues.
If necessary, clean and wipe off again.
Disinfect entire machine, including table, with alcohol-based disin-
fectant.
Close chamber lid and lock it in place.
Use a hand-held spray lance to apply disinfectant to the floor.
Wait until the application time has elapsed, see instructions of dis-
infectant manufacturer.
If necessary, rinse the floor with water of drinking quality; see in-
structions of the disinfectant manufacturer.
Remove the plastic bag from the mains plug.
Dispose of plastic bags properly. For reasons of hygiene, never
reuse bags.
Open the chamber lid.
Attach the following components:
– Insertable counter-pressure bar.
– Sealing bar, see Section 7.3.2 "I
– Filling plate.
– Sloping insert with with support angle.
03.06.2014
NSTALL THE SEALING BAR
".