Unauthorised Modifications And Manufacture Of Spare Parts - multivac C200 Instruction Manual

NOTICE Danger of material damage!
Improper use of the machine can damage it.
Damage can cause faults in the machine, which in turn can result in
reject packs.
Do NOT overload the machine.
Clean and service the machine on a regular basis.
Check if the machine is in full working order prior to starting
work.
Do NOT start the machine if you notice defects, damage or a
change in the operating behaviour of the machine.
Have faults and damage repaired immediately by an authorised
technician.
Repairs and service work should only be carried out by an
authorised technician.
1.1.2
Genuine MULTIVAC spare parts and accessories provide the highest
level of safety for personnel. Parts and equipment from other manu-
facturers have not been tested by MULTIVAC and are therefore not
approved. The use of such components can alter the properties of the
machine and thereby impair safe operation.
Injury hazard!
It is very dangerous to use third-party parts.
The use of third-party parts endangers safe operation and can
WARNING
cause serious injuries.
Do NOT perform any unauthorised modifications or conver-
sions.
Do NOT modify or remove any protective or safety devices.
Use only MULTIVAC spare parts and accessories.
The manufacturer disclaims any liability for damage caused by the
use of third-party parts or unauthorised modifications.
Fig. 1:
The lubricants recommended by MULTIVAC are ideally matched to
the individual modules of the machine.
Unauthorised modifications and manufacture of
spare parts
Pro Original
03.06.2014
Safety
General safety instructions
11