multivac C200 Instruction Manual page 35

Danger of explosion!
Gas mixtures with oxygen proportions over 21% are explosive.
A gas mixture with an oxygen proportion over 21 % can cause an
DANGER
explosion and fire if it comes in contact with heat, oil or grease.
Do NOT use a gas mixture with an oxygen proportion of over
21%.
Risk of death!
During the packing process, inert gases are released.
Inhaling inert gas can impair your breathing. Over a longer period of
DANGER
time, this can be fatal.
A surface area of at least 40 square meters per machine must
be made available.
Air the rooms sufficiently and avoid any accumulation of gas.
Observe the maximum input pressure, see 'Technical specifica-
tions'.
Cut off the gas supply at the end of work.
Adhere to the safety regulations in effect in the country where
the machine is used.
Connect the inert gas (only for machines with inert gas connec-
tion).
Close the stop-cock for the gas supply.
Attach the gas hose to the inert gas connection of the machine.
Fasten the hose with hose clamps.
Open the stop-cock for the gas supply.
Set the input pressure; see Technical Specifications.
Check the mains voltage on the type plate and compare it with the
voltage of the mains electricity.
If the values match, connect the machine to the mains electricity
at a place which is always easily accessible.
Remove all the protective film.
Clean the machine, see Section 6 "C
Setting up the machine and starting it up
03.06.2014
".
LEANING
Start-up
35