Holidays; System Status - Mircom TX3 Series Installation Manual

•
•
2.6

Holidays

Up to 128 holidays can be entered in the system. Each holiday consists of the
following:
•
•
If a holiday falls on the same date each year it can also be programmed as an
annual event.
Each holiday has a holiday ID and label to identify the holiday for use in the
Configurator software.
By default, New Year (January 1) is already programmed into the system.
2.7

System Status

The controller monitors inputs for trouble and alarm conditions.
2.7.1 Common trouble
The common trouble indicator is active when any of the following inputs receive
a trouble condition:
•
•
•
The common trouble status clears only if all the above inputs are back in normal
state. When the common trouble status is active, the common trouble led flashes
at a slow rate.
2.7.2 Common alarm
The common alarm status is active when any of the following inputs receive an
alarm condition:
•
•
The common alarm status clears only if all the above inputs are back in normal
state. When the common alarm status is active, the common alarm led flashes at
a fast rate.
UL Listed TX3-CX Card Access System Installation Manual
Version 2
LT-6906 Copyright 2019
PIN required schedule
Access levels
start time/date
end time/date
Any supervised input
Power (AC and battery)
Door held open warning
forced entry alarm
door held open alarm
Configurable Features
25