Schedules - Mircom TX3 Series Installation Manual

2.4.5 Door held open warning
The door held open warning timer starts when access is granted. When the door
unlock timer expires and the door does not close during this interval a 'door held
open' warning is issued to the PC and the common trouble status becomes active.
If the door closes during this interval, the timer resets and no warning report is
sent to the PC.
The door held open warning timer is programmable from 10 to 900 seconds. The
default is 30 seconds
2.4.6 Door held open alarm
The door held open alarm timer starts when the door held open warning timer
expires and the door remains not closed. When this timer expires and the door is
still open, a 'door held open alarm' is issued to the PC and the common alarm
status becomes active. The door held open alarm timer is programmable from 10
to 900 seconds. The default is 60 seconds
2.5

Schedules

Schedules let you set up a timetable to establish when certain actions are
permitted to occur, such as door access. These schedules are designated and
listed by name in the Configurator software, and are available for selection
wherever it is necessary to invoke access permission.
The system can store up to 64 schedules. Each schedule consists of eight periods
with each period consisting of
•
•
Each schedule has an ID and a label to identify the schedule for use in the
Configurator software.
If the current time and day satisfies any one of the eight periods in a schedule, the
schedule is considered to be active; otherwise, it is inactive.
By default the following two schedules cannot be edited:
•
•
Schedules are used for the following:
•
•
•
UL Listed TX3-CX Card Access System Installation Manual
24
LT-6906 Copyright 2019
Start time and end time in hours: minutes format
Days of the week and Holiday selection
'Always' schedule
'Never' schedule
Timer schedule
Correlations
Auto-unlock
Configurable Features
Version 2