Mircom TX3 Series Installation Manual page 18

•
•
The high security mode locks all doors in the unlocked mode.
Whenever the high security mode changes, the beeper on the reader associated
with this access point sends a distinct beep.
2.3.3 PC decision required
During this mode the decision to grant access is transferred to an attendant. Using
the PC the attendant grants or denies access. Only valid cards assigned with the
PC decision requirement are able to make this type of access request.
2.3.4 Facility code mode
Access cards consist of two codes; facility code and card code. The facility code
mode is designed for new installations where access cards are not programmed
into the database. When the facility code mode is enabled, cards with same
facility code are granted access.
The facility code can be set to any number. If a number is not chosen, it will
automatically default to "0" as a placeholder.
In this mode, the door is unlocked for the same period of time that as that of the
standard door unlock timer. This mode is configured for each access point.
2.3.5 Card + PIN
This mode provides another level of security during certain parts of the day.
During this mode not only a valid card is required for access but also a PIN code.
The PIN code is 1 to 4 digits long and is programmed for each card. 0 is not a valid
PIN code.
There is a schedule associated with this mode. When the schedule is enabled, the
mode is on and when the schedule is disabled, the mode is off.
This feature requires a card reader with a keypad.
2.3.6 Anti-passback
This mode prevents unauthorised users from getting access. During the anti-
passback period if a valid card is used at an access point, it cannot be re-used at
the same access point until the pre-programmed anti-passback timer expires.
After expiration of the timer, the user regains access.
UL Listed TX3-CX Card Access System Installation Manual
18
LT-6906 Copyright 2019
the Configurator software can change the mode from high security on to
high security off or from high security off to high security on
an event correlated with a response to turn on or off the high security mode
Configurable Features
Version 2