Quick Installation Reference - Crestron CHV-THSTAT Operation And Installation Manual

Crestron CHV-TSTAT and CHV-THSTAT

Quick Installation Reference

1. Select a suitable location and run the connecting wires from the heating/cooling system and the Cresnet system.
Refer to page 5 for a description of the thermostat connectors.
Refer to page 7 for Network wiring details.
Use the appropriate wiring diagram:
•
Separately Powered Two Wire Heat
(Powered by an Independent Transformer) (Refer to page 13)
•
Single Stage Heat Only (Refer to page 13)
•
Single Stage Heat with Fan Control (Refer to page 14)
•
Single Stage Cool Only (Refer to page 14)
•
Single Stage Heat/Cool with Integrated Control Unit (Refer to page 15)
•
Single Stage Heat/Cool with Separate Systems (Refer to page 16)
•
Single Stage Heat Pump (Refer to page 17)
•
Two Stage Heat Pump (Refer to page 18)
•
Slab 1, Slab 2, and Slab 3 Systems (Floor Warming and/or Space Heating) (Refer to page 19)
•
Slab 4A Two Stage Heat/Single Stage Cool Systems,
Slab 5A Floor Warming with Single Stage Space Heat/Cool (Refer to page 20)
•
Slab 4B Two Stage Heat/Single Stage Cool System,
Slab 5B Single Stage Heat/Cool with Floor Warming (Refer to page 21)
•
General Humidifier Connections (Refer to page 22)
2. Separate the thermostat from the backplate to expose the connections and mounting holes.
3. Mount the thermostat backplate (60 inches above the finished floor) directly to the wall with wall anchors (not
provided) and screws (not provided) or to a single-gang box (not provided) mounted horizontally, and connect
the wiring. Refer to page 23 for detailed mounting instructions and page 8 for detailed connector information. If
using a five-sided box, fill with insulation material to minimize wall air ingress.
4. Install the thermostat on the backplate (Refer to page 23).
5. Setup the thermostat (Refer to page 25).
Heat/Cool Radiant and Forced Air Systems Setup on page 28.
Heat Pump Systems on page 31.
Slab Systems begin on page 34.
6. Configure the thermostat (Refer to "Operating the Thermostat" on page 55).
Operations and Installation Guide – DOC. 8163C
Thermostats
Contents • iii