Crestron CHV-THSTAT Operation And Installation Manual page 17

Crestron CHV-TSTAT and CHV-THSTAT
Operations and Installation Guide – DOC. 8163C
should show the device's default Cresnet ID (a.k.a. Net ID).
6. Enter the Cresnet ID that the device should be set to and click OK. The
number you enter should appear on the list.
CAUTION: This function does not prevent you from setting duplicate IDs. Be sure
to check current assignments before entering the desired Cresnet ID number.
Serial Number to TSID Conversion
This utility is useful in a case where there are multiple devices of the same type on a
network, you need to locate a particular one, you know the TSID but not the serial
number, and your site installation list is based on device serial numbers. In this (or
the reverse) situation, do the following:
1. Open the Crestron Viewport.
2. From the Viewport menu, select Functions | Serial Number
Conversion Tool. The "Serial Number
window is displayed.
"Serial Number to TSID Conversion Tool" Window
3. Enter the serial number or TSID number as instructed; press the appropriate
button to obtain the corresponding number.
NOTE: Enter serial numbers, including spaces, exactly as they appear on the unit
label. Alpha characters in serial numbers or TSID numbers may be entered in upper
or lower case.
TSID Conversion Tool"
Thermostats: CHV-TSTAT and CHV-THSTAT • 11
Thermostats
TSID