Crestron CHV-THSTAT Operation And Installation Manual page 45

Crestron CHV-TSTAT and CHV-THSTAT
OTHER SETTINGS
SETUP:
OTHER SETTINGS
NO APPLICABLE SETTINGS
SERVICE/TEST
SETUP: SERVICE/TEST
Slab Heat Call:
Humidifier Call:
Fan Call:
NOTE: This screen bypasses all system
delays and is used by the installer to manually
operate the HVAC system. Only one system
can be run at a time.
Operations and Installation Guide – DOC. 8163C
Slab 2 – Single Stage Space Heat with Slab Maximum (Continued)
OFF
OFF
OFF
NOTE: You cannot exit if the sensor setup does not
meet system requirements.
SENSORS
SETUP: SENSORS
Sensor
Internal:
Remote 1:
DETECTED: 1 x T
Remote 2:
Choose USE or OMIT (Built-in Sensors Only).
Choose USE, OMIT, OD, or SLAB (Remote
Sensors Only)
NOTE: Remote 1 and Remote 2 options do not
appear on this screen if these sensors are not
connected.
Press MODE button to return to the first screen
Press and hold the MODE and VIEW buttons
simultaneously for five seconds to exit Setup.
Thermostats: CHV-TSTAT and CHV-THSTAT • 39
Thermostats
>TEMP HUM
USE OMIT
SLAB
Or