Crestron CHV-THSTAT Operation And Installation Manual page 63

Crestron CHV-TSTAT and CHV-THSTAT
Fan Mode Screen
Fan Mode
MODE
AUTO ON
VIEW
Humidifier Screen
Humidifier
MODE
ENABLED DISABLED
VIEW
Crestron System Screen
Crestron Sys
MODE
ONLINE HOLD
VIEW
Global Update Screen
Global Update
MODE
SEND
VIEW
Operations and Installation Guide – DOC. 8163C
2. Fan Mode
Pressing the MODE button again displays the "Fan Mode" screen.
Use the up ▲and down▼arrow buttons to select AUTO or ON.
NOTE: In AUTO, the fan runs only when the system calls for heat or cool.
In ON, the fan runs continuously.
3. Humidifier
Pressing the MODE button displays the "Humidifier" screen. This screen
appears if enabled in setup and the thermostat is equipped with a humidity
sensor.
Use the up ▲and down ▼arrow buttons to select ENABLED or
DISABLED.
4. Crestron System
Pressing the MODE button again displays the "Crestron Sys" screen.
Use the up ▲and down▼arrow buttons to select ONLINE or HOLD.
ONLINE – Data flows both ways, to and from the thermostat, enabling
adjustment from a remote location.
HOLD – Data flows one way, from the thermostat, blocking system
commands to change the temperature and humidity when you do
not want the current settings reset. Restores to the last command
sent when online is re-engaged.
5. Global Update
Pressing the MODE button again displays the "Global Update" screen.
Allows a single thermostat location to update the current temperature
settings to all other thermostats on the system, provided that this function has
been defined in the Crestron program.
Press the down▼ button to send the update.
Pressing the MODE button again returns you to the Main Screen
Thermostats: CHV-TSTAT and CHV-THSTAT • 57
Thermostats