Crestron CHV-THSTAT Operation And Installation Manual page 74

Thermostats
Slot 2 – Humidity Control (continued)
SIGNAL
Remote2Humidity
OutdoorHumidity
Slot 3 Detail View – Slab Control
68 • Thermostats: CHV-TSTAT and CHV-THSTAT
I/O SIGNAL DEFINITION
TYPE
Output Analog Reports the humidity reading of the Remote 2 humidity sensor in
whole numbers.
The Remote 2 humidity sensor reading is reported regardless of
the Use/Omit/OD designation.
Output Analog Reports the humidity reading of any humidity sensor set to "OD"
(Outdoor) in whole numbers.
If more than one humidity sensor is set to OD, this is the mean
outdoor humidity.
Humidity sensors are manually set to Use, Omit, or Outdoor via
the setup menus on the thermostat.
Crestron CHV-TSTAT and CHV-THSTAT
Operations and Installation Guide – DOC. 8163C