Fault Diagnosis Using Diagnostic Mode - Teledyne 200A Instruction Manual

Teledyne API Model 200A NO Analyzer Instruction Manual, 02246, Rev. F1
X

9.1.3 Fault Diagnosis Using DIAGNOSTIC Mode

Diagnostic mode can be looked at as a tool kit of diagnostics to help troubleshoot the instrument.
To enter DIAG mode press SETUP-MORE-DIAG.
The diagnostic modes are summarized in Table 9-3. To access these functions, press SETUP-
MORE-DIAG, then press NEXT, PREV to select the desired mode, then press ENTR to select
that mode.
9-11