Setting Up Multiple Projectors; Enabling Multiple Projectors; Adding A Secondary Projector - Christie CP2309-RGB User Manual

Setting up multiple
projectors
Learn how to add, modify, and remove primary projectors and secondary projectors.

Enabling multiple projectors

Enable multiple projectors to display 3D or HDR content.
1. In the left navigation menu, select Service Setup > Multi-Projector Setup.
2. Select the Multi-Projector Control slider.
The color of the slider changes to green to indicate it is active.
3. Select the Active 3D Glasses slider if you are using active 3D glasses and want to send left
and right images to multiple projectors.
If you select this option, you cannot change the eye selection setting.
4. In the Master Eye Selection list, select Right or Left for the primary projector.
This option is not available when Active 3D Glasses is selected.
5. If using a Christie NAS device, select the Multi-Projector Sync of Content slider to
automatically synchronize ingested content on the primary projector to all secondary
projectors.
The color of the slider changes to green to indicate it is active.
For more information on synchronizing content using multiple NAS devices, see the Christie
NAS-S3 Installation and Setup Instruction Sheet P/N: 020-102537-XX.

Adding a secondary projector

Add a secondary projector to display 3D or HDR content.
1. In the left navigation menu, select Service Setup > Multi-Projector Setup.
2. Select + New Slave Projector.
This option is available only when the Multi-Projector Control slider is selected.
3. Type a name and IP address for the projector.
4. Select Add.
5. In the Eye Selection column, select Right or Left.
This option is not available when Active 3D Glasses is selected.
CP2309-RGB User Guide
020-103081-02 Rev. 1 (03-2021)
Copyright © 2021 Christie Digital Systems USA, Inc. All rights reserved.
73