Editing Existing Global Trigger Settings; Deleting A Global Trigger; Importing A Device Library; Viewing A Device Library - Christie CP2309-RGB User Manual

Editing existing global trigger settings

Edit the settings of an existing global trigger to change its behavior.
1. In the left navigation menu, select Automation > Device Input Triggers.
2. Select the Global Triggers tab.
3. To the right of the global trigger you want to edit, select Edit
4. Edit the global trigger settings.
5. Select Save.

Deleting a global trigger

Delete a global trigger when it is no longer required.
1. In the left navigation menu, select Automation > Device Input Triggers.
2. Select the Global Triggers tab.
3. To the right of the global trigger, select Delete
4. To confirm the deletion, select Delete.

Importing a device library

A device library contains commands that are used to control a specific device.
1. In the left navigation menu, select Automation > Device Libraries.
2. select Import Device Library.
3. Browse to the location of the device library file.
4. Select the file and select Accept.

Viewing a device library

View device libraries to determine if a library exists for the network device.
1. Import the device library.
2. In the left navigation menu, select Automation > Device Libraries.
3. To the right of the device in the View Library column, select View Library.
Review the list of actions available for the device.

Deleting a device library

Delete a device library when it is no longer required.
1. In the left navigation menu, select Automation > Device Libraries.
CP2309-RGB User Guide
020-103081-02 Rev. 1 (03-2021)
Copyright © 2021 Christie Digital Systems USA, Inc. All rights reserved.
.
.
Automation
82