The Cut Settings Window - Intec ColorCut SC5000 Series User Manual

10.8 The Cut Settings Window

ColorCut Pro displays a preview of the file to be cut in the Job Preview Window
If your cut file contains different line colors then each color is matched to one of the
8 primary colors that ColorCut Pro recognises. The cutting lines are displayed in
their respective colors, with each color listed in the Cut Setting window
2
In the example below (showing a different cut profile in the Job Preview window
for explanation purposes) there are multiple colored lines within the cutting profile.
Again the Red line has the Cut Setting/Action 'cut' next to it
set to 'crease' while the Black colored lines are yet to have an action assigned to
8d
. If there are more colors than shown on the list, use the scroll bar
them
8e
the additional colors.
Intec Printing Solutions - ColorCut Pro User Guide for Intec ColorCut SC5000 ................................................................................................Page No: 65
8
8a
8b
, Yellow & Cyan are
8c
8
2
.
8
.
Next to each Color,
a Cut Setting/Action
8a
will be shown
8b
, . The software
will remember
previous Cut
Setting assignments
applied to a color
from the last
time the Color
was assigned.
(If a Color has
not previously
been used, the
assignment may be
blank).
to see
8f
8e
8d
8c
8d
8f