10.12.4 Creating TAGs to hold elements in Using "Line Style"
The SC5000 is an X-Axis cutter. This means during cutting the sheet is moved
back and forwards. This type of cutter is common for label cutting as the backing
sheet for the labels naturally holds the labels in place.
When using the SC5000 for Die-Cutting (full cut through), applications.
It is important to place TAGs in the cutting lines to hold the elements in
the sheet to prevent them from falling out during cutting and causing an
obstruction. This can be done automatically using the Line Style feature.
1
.
In the preview
shown right, the
example box
has a cut line
for windows (in
Green) and a
cut line for the
outside (in Red).
Currently both
green and red
line colors
8g
&
are assigned
8h
to CUT
.
10b
(which is a solid
cut
).
12d
The preview
shows these lines
as solid.
Intec Printing Solutions - ColorCut Pro User Guide for Intec ColorCut SC5000 ................................................................................................Page No: 69