Intec ColorCut SC5000 Series User Manual page 12

Configuring WindowsOS Wi-Fi HotSpot (Cont.).
3.
Left click on the Wi-Fi icon
to display the 'Wi-Fi, Network & Internet
setting' menu, then Right mouse click over the
Mobile Hotspot
E
The sub menu item 'Go to Settings' will be displayed.
Click this.
4.
The 'Windows Mobile hotspot' configuration menu will be displayed. This menu
is only required when initially setting up the HotSpot. Each time you activate
the HotSpot after this, the settings for the SSID, and Password will be remembered.
If you can't activate the HotSpot and
you see the message show to the
right, then you skipped step 2. You
must ensure you have an internet
connection to use Windows HotSpot,
even though the cutter does not need
one.
Intec Printing Solutions - ColorCut Pro User Guide for Intec ColorCut SC5000 ................................................................................................... Page No: 12
in the task bar
D
button in the lower right.
F
E
D
Your Intec SC5000
is set to make a
direct connection
to a 2.4GHz
WLAN with an
SSID of "H3", and
broadcasts the
Live video feed to
that connection.
You need to set up
your HotSpot to
match this SSID
name. Click Edit
to configure
F
your Hotspot to
2.4GHz, and set
your SSID and
the password for
connection.