Production Log - Intec ColorCut SC5000 Series User Manual

11.13 Production Log

The SC5000 has 2 different log's that provide feedback on your cuttng.
The view the basic log, click the Production Log button at the bottom left of the
Production screen .
13
Here you will be able to view
a summary of an errors during
cutting. i.e. Jobs not found,
13a
QR codes not read and Target
13a
Scanning errors.
The summary totals can be
cleared, by clicking the CLEAR
TOTALS button .
13b
13c
13b
A more advanced log can be
generated by enabling the
Generate Industry 4.0 Log file
13
check box .
13c
The Industry 4.0 log is an external log.file (Tab delimited) that is generated as each
job is output, including identification of the Job ID, the time released, the status of
the job, number of colors within the job, along with the color used, tool applied and
length cut for the specified tool (example shown ).
13e
The Industry 4.0 Log may be required by EPOS systems and certain JDF systems.
To find the location of the output data file, for your EPOS, JDF system (or third
party application) navigate to :
C:\Program Files (x86)\Intec\ColorCutPro\industry4
13d
13d
13e
Intec Printing Solutions - ColorCut Pro User Guide for Intec ColorCut SC5000 ................................................................................................Page No: 85