Activation/ Deactivating Your Colorcut Pro License; Deactivating Colorcut Pro - Intec ColorCut SC5000 Series User Manual

9.10 Activation/ Deactivating your ColorCut Pro License

ColorCut Pro is activated and
licensed using an On-Line
License server. You receive a
license providing 2 activations.
One is for your Artwork PC, one
is a remote cutting computer (in
case you do not wish to use your
design PC (or the same person)
to perform your cutting tasks.
The Mac client does not require a
license.
If you wish to move ColorCut Pro
from one computer to another,
you MUST deactivate ColorCut
Pro on your current computer
9
before installing on the new one.
WARNING: If you do not deactivate your ColorCut Pro license, the
online activation server will run out of activations/licenses for your
license code and you will not be able to license the new computer.
Therefore ColorCut Pro will not run. In this circumstance, you will
need to either de-activate your previous installation of ColorCut Pro or
purchase an additional license code.

9.10.1 Deactivating ColorCut Pro

After clicking the [Activation/Deactivation]
button the license activation screen
9
will appear at the bottom of this screen.
Click on the [Deactivate] button
Clicking the Deactivate button will
connect to the On-Line license server
and deactivate your license. At the
same time it will disable your license on
this computer and you will free up one
license code for either re-activation on
this computer OR for installation on an
alternative PC.
NOTE: If an on-line
connection is not
available then it will
not be possible to
deactivate your license until you have an on-line connection.
Intec Printing Solutions - ColorCut Pro User Guide for Intec ColorCut SC5000 ................................................................................................... Page No: 58
.
9a
9