Advanced Productivity Options - Intec ColorCut SC5000 Series User Manual

11.11 ADVANCED Productivity options

The SC5000 uses a sophisticated image processing system to identify the
PageMARK registration targets (and QR codes). Designed primarily to read Black
PageMARKs on White media the advanced Vision3 sensor, will auto invert images,
to additionally enable the reading
of White PageMARKs on Black
Sheets.
The Vision3 image scanning
system is designed to determine
the DMIN vs DMAX of the Mark
versus the background area (Using
edge detection based on maximum
dynamic range contrast point and
determining the centre point).
You can widen the range of media
that can be scanned by adjusting
the back lighting system (refer to
section 10.4) on ColorCut Pro's
main interface panel.
However, the Advanced button
the user with some extended options and automated options to assist scanning of
registration PageMARKs and QR codes that increases the scanning tollerance and
helps scan a wider range of media.
Click the ADVANCED button to display the Advanced scanning options.
Checking the ReScan QR Rerty Count
to ReScan BOTH Registration PageMARKs and QR codes as set (the applicable
range is 1 - 5 times). This can be useful on some colored media, mettlic or foild
media and porous media such as Inkjet Printed RICE paper. However note, this
may fractionally reduce productivity as the Scanning of each PageMARK will take
fractionally longer (approx 1.5sec more per target).
Checking the Vary Lighting During Retries
will pulse the background lighting from low to high during the mark scanning (then
returning it to the previous setting). This avoids the need for the user to adjust
the Back lighting control on the main ColorCut Interface, and enables automation
of a range of lighting conditions during the PageMARK scanning AND QR code
scanning.
While both of these functions can widen the tolerance for different media
that can be scanned and read, it should be noted that each additional
step will extend the time required for scanning and reduce productivity,
Thus, for the optimum productivity when using standard media or paper/
card/label stocks it is not necessary to activate these features.
Intec Printing Solutions - ColorCut Pro User Guide for Intec ColorCut SC5000 ................................................................................................... Page No: 86
within the Productivity Dialogue box provides
14
check box, will instruct the SC5000,
14b
check box, is very useful, as this
14c
14
14a
14b