Auto Find - Automatically Setting the Sensor Offset (Cont)
4.
Start the Wi-Fi HotSpot on your computer (as described in Section 3.2 of this
manual). Ensure 1 connected device appears (this will be the IP address of
your cutter), in the HotSpot.
5.
Launch the ColorCut Pro application from your computer.
Ⓐ
If the SC5000 is connected under the [SETTINGS] button, and your Wi-Fi
Hot-Spot is active, your should see a preview of the Vison3's CCD camera in
the 'Live Preview' window Ⓐ. If not check the Wi-Fi Hot Spot has a device
connected and that 'OBTAIN IP ADDRESS Automatically' is set under the
[SETINGS]- live video connection option. Then restart the ColorCut Pro
app.
6.
BEFORE USING THE AUTO-SHEET FEEDER,
(USED
IN
PROCESS). IT IS IMPORTANT TO ENSURE
YOU HAVE SET THE CORRECT MEDIA SIZE.
To set/check the media size loaded into the SC5000 Auto-Sheet Feeder (in
Step 3 above),and ensure it matches the media you have loaded, click on the
[PRODUCTIVITY] button at the top of the ColorCut Pro window.
Intec Printing Solutions - ColorCut Pro User Guide for Intec ColorCut SC5000 ................................................................................................Page No: 53
THE
AUTO-CALIBRATION