Selecting Order Of The Cut/Creasing To Be Performed; The Material Type/Actions Window - Intec ColorCut SC5000 Series User Manual

10.9 Selecting Order of the Cut/Creasing to be performed.

The sequence/order in which the actions are completed is the order in which the
colors are shown in the Cut Settings list.
It is normal to perform Creasing or Scoring
operations BEFORE cutting your substrate. If
necessary the cutting and creasing order can be
changed by using the arrow
each color. The UP
up the list.
Remember colors at the top of the list will be processed first.

10.10 The Material Type/Actions Window

The Material Type Window can also be considered an action Window. You can
create Material Types or actions for each process/task you wish the cutter to
perform.
A Material Type/Action is a profile
consisting of the following saved settings
being used:
• Intec Cutting Tool (Cutter, Crease, or
Ignore)
• Speed of Tool
• Force/Pressure applied by Tool
• Type of Line (Solid, or Dashed, or
with Tags)
• If the Tool should double pass.
(e.g. Double Crease)
As you get used to your Intec ColorCut SC5000 and the different materials you cut,
you can start to save these profiles for different cutting forces or speeds dependant
on the media types. So the Action Window is also known as the Material Type
Window.
The Material Type/Actions Window
profiles you have created that you can use or employ.
You can click the [+] symbol
Intec Printing Solutions - ColorCut Pro User Guide for Intec ColorCut SC5000 ................................................................................................... Page No: 66
symbols next to
2
arrow will move a color
9a
10
to add a new Material Type/ Action.
10a
After clicking the [+] symbol you will be prompted
to enter the name you wish to call your Material
Type/Action.
Click [OK] and then follow the instructions
following for EDITING Material Type /Actions
section 10.12 following.
9
9a
10
shows a list of all the pre-defined settings /
10a
10b