Job Numbers, Barcodes And The Job Library - Intec ColorCut SC5000 Series User Manual

Automatically Adding PageMARKs (Cont.)
When printing your Artwork you will want to hide the cut lines as you do not want
these to print. Generating the PageMARKs on a separate layer means that you
don't hide your PageMARKs when hiding your cut lines and enables you to leave
the PageMARKs layer visible alongside your artwork layer (while still enabling you
to hide your cut lines).
Below the file is prepared for Printing (or saving as a PDF for digital printing systems). The
cut line layer is hidden and NOT visible however
the NEW LAYER which includes
alongside
the alignment PageMARKs ( 'ColorCutPro Auto Placement Only' ) is visible
the layer including your artwork D, enabling your job to
print with your artwork
AND the PageMARKs visible on your document.
D

6.5 Job Numbers, BarCodes and the Job Library

The standard way of adding PageMARKs (detailed above) provides accurate cutting
of your files directly from Illustrator or CorelDraw. However in many cases the
Graphic Designer who generates the designs may not be the operator who is
responsible for also cutting the jobs.
Files including PageMARKs MUST be cut from Illustrator or CorelDraw, so this
means that the operator responsible for cutting the jobs must also use Illustrator or
CorelDraw. Even when the same operator is cutting the files, it may be some time
later when the printed job needs to be cut and this would require the operator to find
and open the original file again.
The ColorCut Pro Job Library feature assigns Job Numbers for your cut jobs and
makes cut file retrieval simpler, faster and more efficient while also making cutting
much easier.
Intec Printing Solutions - ColorCut Pro User Guide for Intec ColorCut SC5000 ................................................................................................Page No: 31