Launching Colorcut Pro (Job Server Mode) - Intec ColorCut SC5000 Series User Manual

8.3 Launching ColorCut Pro (Job Server Mode)

There are 2 ways to launch the ColorCut Pro (Job Server) version of ColorCut Pro.
1.
Open the ColorCut Pro (Job Server)
from Start menu
Open the Windows [START] menu,
and select ColorCut Pro from the
Programs/Intec folder.
The ColorCut Pro splash screen will
briefly appear then the main ColorCut
Pro application will be displayed.
In the preview window,
an informational image
will appear showing you
where to position a job (if
manually positioning ).
Once a job is retrieved
by scanning a QRCode
OR by entering a job
number , the preview of
the loaded job will then
be displayed.
If you skipped the previous section 8.1-8.3 then please note: During
installation you should have selected the cutter you wish to use. If the
main ColorCut Pro screen does not look like the one shown above, please
follow the instructions on the next page to set the correct customisation of
ColorCut Pro to match your cutter.
Intec Printing Solutions - ColorCut Pro User Guide for Intec ColorCut SC5000 ................................................................................................Page No: 42
2.
If you are already running ColorCut
Pro (Direct mode) then open from
Or
ColorCut Pro (Direct)
If you already have ColorCut Pro
(Direct) open, you can
SWITCH to Job Server mode,
by clicking the QR Code icon.