Intec ColorCut SC5000 Series User Manual page 17

Configuring Windows Wi-Fi Direct Access Point (Cont.)
4
. The first time you launch Wi-Fi Direct Access Point, you will need to set the
Access Point Name (SSID) and the Security Key/Password to match the SSID
and Password that your Intec ColorCut Cutter will try to connect to.
Click on the Access
Point Name SSID
set it to 'H3' .
Click on the Access
Point Security Key and
set the password to
'12345678'
D
5
. Having entered the Access Point Name and the Password ensure that is starts
each time with the same settings by clicking the check box next to "Start
Access Point with latest settings on app startup"
Click on the button
'START ACCESS
POINT' to configure
the PC to accept Direct
Wi-Fi connections.
6
. After clicking 'START
ACCESS POINT', the
Intec cutter will take
approx 30 secs to 2mins
to see the Wi-Fi access
point and connect.
When the Intec cutter
connects, you will
see the device and IP
address appear in the
left column,
F
You can now follow the the section on Graphic Design and Using ColorCut Pro. For
how to set up your artwork and how to configure the ColorCut Pro app for initial use
and daily operation.
Intec Printing Solutions - ColorCut Pro User Guide for Intec ColorCut SC5000 ................................................................................................Page No: 17
and
C
C
.
E
F
D
E