Intec ColorCut SC5000 Series User Manual page 13

Configuring WindowsOS Wi-Fi HotSpot (Cont.).
5.
Under, Network Name, enter the SSID name 'H3' as shown G. Within the field,
Network password, enter the password '12345678'
will automatically connect to the SSID "H3", with a password of '12345678'. So
these entries must be set to match exactly.
6.
The Intec SC5000 Vision3 sensor's image Echo feature broadcasts only using
the 2.4GHz, so it is essential that you set the 'Network Band'
you set it to 5GHz or "Any Available" the cutter will not connect to your HotSpot
and you will not be able to see the Camera.
7.
Click save to save finish and save your setting.
and in future you only need to enable or disable the connection. When you
click SAVE you will be returned to the 'Windows Mobile hotspot' configuration
dialogue box.
Intec Printing Solutions - ColorCut Pro User Guide for Intec ColorCut SC5000 ................................................................................................Page No: 13
(The Intec SC5000 cutter
H
G
H
I
These will be remembered
to 2.4GHz, if
I