Table of Contents
Advertisement
6.1 THE CONTROL PANEL (Cont.)
The MENU settings & options
The Menu screen allows you to check
settings or change options on your Intec
ColorCut LC600 cutter.
B
Press the MENU TAB, to select the
menu screen. The MENU TAB changes
color to a solid purple color, to show you
have selected that option.
In the Menu mode, the cutter status
changes to [OFF Line]
longer receive new cutting files.
you have finished changing the menu
settings press the
to return the cutter to the HOME screen,
and change the LC600 cutter status back,
to ONLINE.
When the main 'MENU' screen is displayed, the options available will be displayed in
the LCD panel screen. Press the
down the list. Press the
If an Item displays the
F
key
to select the item to set the parameters.
If an Item displays the
the options by pressing the
settings.
There are 2 MENU modes, DEFAULT which provides the typical settings required. And
ADVANCED, which displays additional advanced settings which do not normally need
to be changed. Each menu option is described later in this manual.
MENU MODE: DEFAULT
CAMERA to TOOL OFFSET
LED: Enabled / Disabled
Menu Mode: Default / Advanced
Firmware Ver: FW1.00.04
Intec Printing Solutions - Manual for ColorCut LC600 Sheet fed Label Cutter ........................................................................ Page No: 39
②
①
C
and will no
When
D
[ ON-LINE ]
Key
DOWN arrow button
UP arrow button
symbol next to it, this indicates you can press the
symbol next to it, this indicates you can toggle through
G
LEFT
③
ON LINE
/OFF LINE
⑥
⑦
H
E
on the key pad to scroll up the list.
or RIGHT
arrow keys
MENU MODE: ADVANCED
CAMERA to TOOL OFFSET
LED: Enabled / Disabled
Menu Mode: Default / Advanced
Firmware Ver: FW1.00.04
Scale Check & Calibration
Fan Setting: 1,2,3
Sensor Check
Reset To factory Defaults
④
⑤
ENTER
⑧
on the key pad to scroll
ENTER
I
to change the
Advertisement
Table of Contents
