The Brightness / Illumination Control - Intec ColorCut SC5000 Series User Manual

10.3 The Live Preview Window (cont.)
The Live Preview Window is a live video 'echo' showing you what the Vision3 CCD
camera sensor captures. When starting a Cut Job, you will see the initial PageMARK
being captured if you are also scanning QR codes, you will see this being captured
3d
and then each of the other PageMARKs. Also during the cutting you will see Live
3e
Video of the media surface (your printed job) as it cuts.

10.4 The Brightness / Illumination Control

The Vision3 CCD camera sensor, includes a mini-LED strip that illuminates the
area being captured. With some types of media it may be necessary to increase or
decrease the brightness of the illuminated area, particularly with porous substrates
like rice paper, or reflective/foiled materials. Adjusting the slider
the brightness, while adjusting the slide down will reduce it. When positioned right at
the bottom of the slide, the illumination will be OFF.
The button at the base of the slide, will reset your slider to the DEFAULT level we
4b
recommend for daily operation.
While adjusting the slider may help for a one off, selected media
if you find you are frequently having difficulty scanning marks
on a specific colour media or reflective media. You may find it
better to use the AUTOMATIC: RETRY SCAN, with VARYING
LIGHT LEVELS feature. This will scan the marks on the current
light level then retry the scan on a lower , then a higher light level
automatically for you. To find out more information on this feature,
please refer to the productivity section ( 11.11 ) in this manual.
Intec Printing Solutions - ColorCut Pro User Guide for Intec ColorCut SC5000 ................................................................................................... Page No: 62
3d
4a
4b
.
3f
3e
up, will increase
4a
3f