Assigning A Material Type/Action To A Color (Or Clearing One); The Editing Material Type Window - Intec ColorCut SC5000 Series User Manual

10.11 Assigning a Material Type/Action to a Color (or clearing one)

To assign a Material Type/Action to a colored
line, select the Line Color you want to assign
the action to in the Cut Setting Window, in
this example we will click on the Cyan/light
8e
Blue color . (Click on the right side of the
list, next to the Color).
11
Finally click the [Assign Color] button.
The name of the selected action will now appear
next to the Line Color
To change an action, follow the same steps, Click
on the right side of the Color Settings
currently assigned action name). Then select the
new Material Type/Action you wish to apply
[Assign Color].
And click
11
To CLEAR a Material Type/Action from a Cut
setting, Click on the right side of the Color
Settings .(on the currently assigned action name). And click
8

10.12 The Editing Material Type Window

The Editing Material Type Window
Type selected (the action
edit the settings to suit the action and any changes will be applied to the Material
Type/Action immediately on the next cut.
Each Material Type (Action), includes the
following adjustable settings.
• Tool Used
12b
• Number of Passes
• Line Style
12d
• Speed of the tool during cutting
12g
• Force/Pressure
Intec Printing Solutions - ColorCut Pro User Guide for Intec ColorCut SC5000 ................................................................................................Page No: 67
10d
.
8f
12
in the material Type section) . You can check,review and
10
.
for the tool.
12c
(Solid or dashed/perforated)
applied during cutting.
12h
Then select the Material Type/Action you
wish to be applied
selected a new material type we created
called 'Perforated Cut' ).
8
10
.(on the
8
.
10
displays the parameters used for the Material
12
12c
8e
(in this case we
10d
10a
11
[Clear Color].
11
12a
8f
12b
12d
12g
12h