Table of Contents
Advertisement
Chapter 6 Using the ColorCut SC5000 Cutter
6.1 Overview of control Panel
The Intec SC5000 control panel includes a large SILVER button (top left) which is the
Feed Stacker control button and in addition to this, there is an intuitive 5" Color LCD
"Touch" LCD panel, with 6 hard buttons to help you make selections and change
values to control your SC5000 cutter.
①
⑥
⑨
B
The SILVER Feed Stacker Control Button - The silver button situated at the top
left side of the Control Panel, is the Feed Stacker Control button. Pressing the
button cycles through the functions of the Media Feed Stacker.
Press to Lower the stacker.
Press again to STOP the stacker from lowering (It will auto stop when it is at its
lowest point).
Press once more to RAISE the stacker (it will auto-stop when the stack height is
at the fully raised position).
C
The 5" LCD Display. The 5" LCD panel is a TOUCH sensitive control panel,
situated on the right side of the Control panel, it displays information about the
current Tool settings and menu parameters for each screen selected.
D
Pressing the light Grey TAB style buttons along the bottom of the LCD panel screen,
enables users to enter the individual functions screens, the Hard buttons
be used in each screen.
A range of Hard buttons can be found to left of the display.
G
LEFT
J
OFF/LINE
Intec Printing Solutions - Manual for ColorCut SC5000 Auto-Sheet Digital Die-Cutter ............................................................ Page No: 39
④
⑦
⑤
⑧
E
UP
I
RIGHT
F
DOWN
I
ENTER
③
Please see the following pages
for detail of the function of
these buttons.
NOTE: The RED LED indicates the unit is
powered on, and GREEN LED, illuminates
as a key is pressed.
②
E
J
-
can
Advertisement
Table of Contents
