Table of Contents
Advertisement
Chapter 6 Using the ColorCut LC600 Cutter
6.1 Overview of control Panel
The Intec LC600 combines an intuitive
2.4" Color LCD "Touch" LCD panel,
with 6 hard buttons to help you make
selections and change values.
B
The 2.4" LCD Display 2.4" LCD
panel is situated at the top of the Control
panel, it displays information and menu
parameters for each screen selected.
Pressing the light Grey TAB style buttons
along the bottom of the LCD panel screen,
C
enables users to enter the individual
functions screens, the Hard buttons can
be used in each screen.
The HOME screen
When the normal 'HOME' screen is displayed, the Speed and Force for the cutting
control is displayed, and can be adjusted.
Please find below details of the function for each hard button.
D
(ONLINE/OFFLINE) Places the cutter ONLINE ready to cut jobs. Pressing the
E
UP
F
ENTER
G
LEFT
H
DOWN
I
RIGHT
Intec Printing Solutions - Manual for ColorCut LC600 Sheet fed Label Cutter ........................................................................ Page No: 38
①
②
③
⑥
button again, will take the cutter offline and jobs can not
be sent.
In addition, when you scroll through the menu options, or setting
the parameters. Pressing the [
leaves the menu list and returns to the default home screen.
The default Online/Home screen displays: Tool : Speed & Force
Plus access to the Menus/settings, Move and Test functions.
INCREASES the cutting SPEED when HOME screen, is
displayed. (Range 0 - 960mm/s)
Pressing the [ENTER], button will accept the setting
shown on the LCD panel when changing menu options.
REDUCES the cutting FORCE when HOME screen, is
displayed. (Range 0 - 760g)
DECREASES the cutting SPEED when HOME screen, is
displayed. (Range 0 - 960mm/s)
INCREASES the cutting FORCE when HOME screen, is
displayed. (Range 0 - 760g)
TOOL1
960
mm/s
SPEED
④
ON LINE
/OFF LINE
⑦
] (ONLINE/OFFLINE) key
LC600
750
g
FORCE
⑤
ENTER
⑧
Advertisement
Table of Contents
